You may want to gather an audience to watch the Sullivan Palatek D375PD compressor perform on your jobsite.
Whether you have attached an air breaker, air impact tool, a post driver, sandblaster or any number of other instruments to the Sullivan Palatek D375PD compressor, you will have a powerful and consistent conductor for your orchestra of tools connected to the one 1.5 inch NPT or the two three-quarter inch NPTs.
The D375PD’s automatic capacity control adjusts to the size and compressed air demand of your tools, consistently delivering the volume of air you need to get the job done. Do not worry about the weather. The compressor can be operated year around in temperatures ranging from -20 degrees F, to 125 degrees F.
The D375PD’s four-cylinder, John Deere Tier 3 125 horsepower engine has an idle speed of 1,650 RPMs and ramps up to a full-load speed of 2,500 RPMs to deliver an operating pressure range of 70-165 PSIG. The dual-pressure D375PD delivers 100 or 150 PSI to run tools or a back-up air plant with the single flip of a switch.
The D375PD has operational stop, turn and tail lights for on-road towing to your off-road job site. Attach the D375PD’s ball hitch to the back of a pick-up truck or larger vehicle and you can tow and relocate it where it is needed.
Worried about tools walking off a job site? The D375PD is equipped with two large, full-length lockable toolboxes on each side of the unit.
Neff Rental branches have Sullivan Palatek D375PD compressors available for delivery or pick up. Call 888-709-NEFF or visit www.neffrental.com for information about the Sullivan Palatek D375PD compressor and to schedule a delivery.